High Pressure Forged ASTM B381 Gr. 12 Grade 12 Titanium Socket Weld Flange

High Pressure Forged ASTM B381 Gr. 12 Grade 12 Titanium Socket Weld Flange

The product is suitable for pipeline systems with low pressure level, pressure fluctuation, vibration and vibration.
Description
Technical Parameters

product-1200-110Product Name:DIN PN Socket Weld Flange

The product is suitable for pipeline systems with low pressure level, pressure fluctuation, vibration and vibration.

Low cost installation

Less time needed to spent on ensuring the accuracy of the cut pipe

They are somewhat easier to align

The slip-on flanges have low hub because the pipe slips into the flange before welding

The flange is welded both inside and outside to provide sufficient strength

They prevent leakage

product-1-1

product-1-1

product-1200-580product-1200-1228

 

Hot Tags: din pn socket weld flange, China din pn socket weld flange manufacturers, welding flanges, ball valve trade, stainless steel 304 flanges, forged stainless steel flanges, ball valve weight, female threaded flange

Those tools can be used for flange rust removal

 

1, rust hammer

is also called a shovel hammer, usually with two edges, one end is "one" type, the other end is "│", the blade is about 20mm wide, mainly used to knock out surface rust, loose oxide scale and old coating. There is also a pointed hammer with a pointed head, used to copy the rust deep in the depression.

2, spatula

The blade is about 50~100cm long, made of wooden handle or hollow steel tube, and the blade width is 40mm~20cm, made of carbon steel or tungsten steel. It is mainly used to remove rust, oxide scale, old coating and dirt on the plane.

3, scraper

Commonly known as "scraping planing", one end is flat, the other end is curved, both ends are bladed, made of carbon steel, about 20cm in length, the flat end is the same as a shovel, and the elbow is used to remove angle iron back and rust and dirt; Pointed scraper, one end of the elbow is pointed, used to remove rust and putty in the gap.

4, file

There are various shapes such as plane and triangle, and it is mainly used to remove protruding hard objects such as welding slag.

5, wire brush

It is divided into long handle and short handle. The end of the brush is made of thin steel wire to remove the rust and residue left by other tools. Hole area.

When all of us are derusting stainless steel flanges, we need to have the above tools, which can be of great help to us.