Suitable for temperatures of 80 ° C.
Flange packing is a unique solution to long-term corrosion problems.
Flange packing is a coating based on a composite polar polymer. The pasty form makes it ready for use without pretreatment. The viscoelastic formulation allows this material to flow into the gaps and voids, creating a good corrosion-resistant seal.
Flange Packing System Flange packing saves time and money because of its ease of use. Provide long-term protection.
Performance: Bonded to steel, FBE (melted epoxy powder), polyurethane, polyethylene Advanced resistance weathering / salt resistance temperature range from -51 ° C to 80 ° C Fill the entire gap Removable / reusable flange surface without excessive Pretreatment uses a manual or pneumatic gun with a flexible nozzle for gentle injection. This ensures that the annular gap is completely filled before being sealed with a CZ wrapping tape.
E-2400 / E2000 high temperature flange packing-suitable for temperature of 149 ° C.
E-2400 / E2000 high temperature anti-corrosion flange packing is designed to protect the flange connection from corrosion in the high temperature of 149 ° C.
E-2400 / E2000 is a non-electrolytic method for the corrosion protection of steel flanges, bolts, pipes and structures with a gel.
The ASTM-B1117 salt spray test was used to test the nut and bolt assembly for 2000 hours. The area protected by E2000 / 2400 can still be turned by hand. Proper use of the E2000 / 2400 helps protect flange connections from corrosion.